Модель1
A parametric model configurable in the ABGUL builder.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| General width | Shown in the builder | 50.0 – 220.0 |
| General depth | Shown in the builder | 42.0 – 160.0 |
| General height | Shown in the builder | 35.0 – 140.0 |
| Height рамки | Shown in the builder | 10.0 – 60.0 |
| Thickness основания | Shown in the builder | 1.6 – 8.0 |
| Wall thickness | Shown in the builder | 1.6 – 8.0 |
| Depth поперечины | Shown in the builder | 14.0 – 55.0 |
| Width продольной piece | Shown in the builder | 15.0 – 60.0 |
| Width направляющей | Shown in the builder | 16.0 – 60.0 |
| Depth направляющей | Shown in the builder | 5.0 – 24.0 |
| Расстояние между крепёжными отверстиями | Shown in the builder | 24.0 – 180.0 |
| Diameter крепёжных отверстий | Shown in the builder | 3.0 – 12.0 |
| Diameter направляющего hole | Shown in the builder | 3.0 – 14.0 |
| Diameter задней выборки | Shown in the builder | 8.0 – 30.0 |
| Height оси направляющего hole | Shown in the builder | 20.0 – 120.0 |
| Width Т-паза | Shown in the builder | 3.0 – 14.0 |
| Width головки Т-паза | Shown in the builder | 12.0 – 50.0 |
| Length продольной piece Т-паза | Shown in the builder | 18.0 – 90.0 |
| Фаска печатных кромок | Shown in the builder | 0.0 – 1.2 |
| Верхний установочный slot | Shown in the builder | — – — |