Монтажная пластина
Универсальная монтажная пластина с размерами и вариантами отверстий: сквозное, потай, гайка, термовставка.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Width | Shown in the builder | 30.0 – 220.0 |
| Height | Shown in the builder | 30.0 – 220.0 |
| Thickness | Shown in the builder | 4.0 – 30.0 |
| Corner radius | Shown in the builder | 0.0 – 30.0 |
| Center pocket | Shown in the builder | — – — |
| Center pocket diameter | Shown in the builder | 5.0 – 120.0 |
| Center pocket depth | Shown in the builder | 0.5 – 15.0 |
| Отверстие pattern | Shown in the builder | — – — |
| Отверстие type | Shown in the builder | — – — |
| Отверстие diameter | Shown in the builder | 2.0 – 16.0 |
| Отверстие spacing x | Shown in the builder | 10.0 – 180.0 |
| Отверстие spacing y | Shown in the builder | 10.0 – 180.0 |
| Pocket diameter | Shown in the builder | 4.0 – 30.0 |
| Pocket depth | Shown in the builder | 1.0 – 12.0 |