Кондуктор мебельной петли 35 мм
Шаблон чашечной петли: диаметр чашки, отступ от края, крепёжные отверстия, упор и втулка.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Hinge preset | Shown in the builder | — – — |
| Custom cup diameter | Shown in the builder | 20.0 – 45.0 |
| Cup edge displacement | Shown in the builder | 12.0 – 40.0 |
| Screw spacing | Shown in the builder | 20.0 – 70.0 |
| Screw diameter | Shown in the builder | 2.0 – 8.0 |
| Screw displacement y | Shown in the builder | -20.0 – 20.0 |
| Plate width | Shown in the builder | 50.0 – 180.0 |
| Plate height | Shown in the builder | 50.0 – 220.0 |
| Thickness | Shown in the builder | 3.0 – 25.0 |
| Corner radius | Shown in the builder | 0.0 – 20.0 |
| Edge lip | Shown in the builder | — – — |
| Lip depth | Shown in the builder | 4.0 – 40.0 |
| Lip height | Shown in the builder | 4.0 – 50.0 |
| Bushing height | Shown in the builder | 0.0 – 18.0 |
| Bushing wall | Shown in the builder | 1.0 – 6.0 |