Фланец и окружность отверстий
Фланец по наружному диаметру, центральному отверстию, PCD, числу и диаметру крепёжных отверстий.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Flange shape | Shown in the builder | — – — |
| Внешний diameter | Shown in the builder | 20.0 – 400.0 |
| Rect width | Shown in the builder | 20.0 – 400.0 |
| Rect height | Shown in the builder | 20.0 – 400.0 |
| Center diameter | Shown in the builder | 0.0 – 300.0 |
| Thickness | Shown in the builder | 2.0 – 40.0 |
| Corner radius | Shown in the builder | 0.0 – 30.0 |
| Pattern | Shown in the builder | — – — |
| Fastener | Shown in the builder | — – — |
| Отверстие count | Shown in the builder | 2.0 – 32.0 |
| Pcd | Shown in the builder | 10.0 – 360.0 |
| Отверстие spacing x | Shown in the builder | 10.0 – 340.0 |
| Отверстие spacing y | Shown in the builder | 10.0 – 340.0 |
| Отверстие diameter | Shown in the builder | 1.0 – 40.0 |
| Fastener clearance | Shown in the builder | 0.0 – 2.0 |
| Pattern rotation | Shown in the builder | 0.0 – 180.0 |
| Отверстие style | Shown in the builder | — – — |
| Head diameter | Shown in the builder | 3.0 – 50.0 |
| Head depth | Shown in the builder | 0.5 – 12.0 |
| Gasket groove | Shown in the builder | — – — |
| Groove diameter | Shown in the builder | 5.0 – 350.0 |
| Groove width | Shown in the builder | 1.0 – 10.0 |
| Groove depth | Shown in the builder | 0.3 – 5.0 |