Крепление / клипса трубы
Параметрическая клипса-кронштейн под трубу с диаметром, зазором, углом охвата, основанием и отверстиями крепежа.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Труба diameter | Shown in the builder | 8.0 – 160.0 |
| Clearance | Shown in the builder | 0.0 – 3.0 |
| Clamp style | Shown in the builder | — – — |
| Wrap angle | Shown in the builder | 120.0 – 340.0 |
| Wall | Shown in the builder | 2.0 – 14.0 |
| Width | Shown in the builder | 8.0 – 60.0 |
| Opening rotation | Shown in the builder | 0.0 – 180.0 |
| База length | Shown in the builder | 25.0 – 160.0 |
| База width | Shown in the builder | 18.0 – 100.0 |
| База thickness | Shown in the builder | 3.0 – 18.0 |
| Landing type | Shown in the builder | — – — |
| Screw diameter | Shown in the builder | 2.0 – 12.0 |
| Screw spacing | Shown in the builder | 15.0 – 100.0 |
| Countersink | Shown in the builder | — – — |
| Head diameter | Shown in the builder | 4.0 – 24.0 |
| Head depth | Shown in the builder | 0.5 – 6.0 |