Шаблон стыковки труб
Надеваемый 3D-шаблон fishmouth/седлового стыка круглых труб по диаметрам и углу пересечения.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Основное pipe diameter | Shown in the builder | 8.0 – 250.0 |
| Branch pipe diameter | Shown in the builder | 8.0 – 300.0 |
| Угол между осями pipe | Shown in the builder | 10.0 – 170.0 |
| Displacement оси второй трубы по X | Shown in the builder | -80.0 – 80.0 |
| Displacement оси второй трубы по Y | Shown in the builder | -80.0 – 80.0 |
| Sleeve length | Shown in the builder | 20.0 – 220.0 |
| Sleeve wall | Shown in the builder | 1.0 – 8.0 |
| Clearance | Shown in the builder | 0.0 – 3.0 |
| Прорезь width | Shown in the builder | 0.0 – 25.0 |
| Прорезь rotation | Shown in the builder | 0.0 – 180.0 |
| Cut setback | Shown in the builder | 0.0 – 60.0 |
| Add опорный буртик на противоположном конце | Shown in the builder | — – — |
| Ring height | Shown in the builder | 1.0 – 12.0 |
| Ring overhang | Shown in the builder | 0.5 – 10.0 |
| Show me дополнительную осевую slot for разметки | Shown in the builder | — – — |
| Center mark width | Shown in the builder | 0.4 – 4.0 |