Шаблон реза трубы под углом
Надеваемый 3D-шаблон косого реза круглой трубы с настройкой диаметра, угла, посадки и буртика.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Труба diameter | Shown in the builder | 8.0 – 250.0 |
| Clearance | Shown in the builder | 0.0 – 3.0 |
| Угол плоскости реза от поперечного реза | Shown in the builder | 0.0 – 180.0 |
| Turn плоскости реза вокруг оси трубы | Shown in the builder | 0.0 – 180.0 |
| Sleeve length | Shown in the builder | 15.0 – 220.0 |
| Wall thickness | Shown in the builder | 1.0 – 10.0 |
| Продольный cut, чтобы pattern легче надевался. 0 = закрытая втулка. | Shown in the builder | 0.0 – 25.0 |
| Прорезь rotation | Shown in the builder | 0.0 – 180.0 |
| Нижний ring | Shown in the builder | — – — |
| Ring height | Shown in the builder | 1.0 – 12.0 |
| Ring overhang | Shown in the builder | 0.5 – 10.0 |
| Контрольная продольная slot | Shown in the builder | — – — |
| Center mark width | Shown in the builder | 0.4 – 4.0 |