Стакан / контейнер
Круглый стакан по внутреннему диаметру и высоте с толщиной, дном, расширением, буртиком и монтажной площадкой.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Внутренний diameter | Shown in the builder | 20.0 – 180.0 |
| Height | Shown in the builder | 30.0 – 260.0 |
| Wall | Shown in the builder | 1.2 – 8.0 |
| Нижний | Shown in the builder | 1.5 – 10.0 |
| Flare | Shown in the builder | -15.0 – 40.0 |
| Rim | Shown in the builder | 0.0 – 10.0 |
| Rim height | Shown in the builder | 1.0 – 8.0 |
| Drain holes | Shown in the builder | 0.0 – 12.0 |
| Drain hole diameter | Shown in the builder | 1.0 – 12.0 |
| Drain pcd | Shown in the builder | 5.0 – 100.0 |
| Landing plate | Shown in the builder | — – — |
| Plate width | Shown in the builder | 25.0 – 100.0 |
| Plate height | Shown in the builder | 30.0 – 140.0 |
| Plate thickness | Shown in the builder | 3.0 – 12.0 |
| Landing hole | Shown in the builder | 2.0 – 12.0 |
| Landing spacing | Shown in the builder | 10.0 – 80.0 |