Кондуктор полкодержателей
Шаблон рядов отверстий под полкодержатели: шаг, число рядов, одна/две колонки и боковой упор.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Отверстие diameter | Shown in the builder | 3.0 – 10.0 |
| Vertical spacing | Shown in the builder | 16.0 – 64.0 |
| Rows | Shown in the builder | 2.0 – 24.0 |
| Columns | Shown in the builder | 1.0 – 3.0 |
| Column spacing | Shown in the builder | 20.0 – 100.0 |
| Start displacement | Shown in the builder | 5.0 – 40.0 |
| Margin | Shown in the builder | 5.0 – 35.0 |
| Thickness | Shown in the builder | 3.0 – 18.0 |
| Bushing height | Shown in the builder | 0.0 – 15.0 |
| Bushing wall | Shown in the builder | 1.0 – 5.0 |
| Edge stop | Shown in the builder | — – — |
| Stop side | Shown in the builder | — – — |
| Stop depth | Shown in the builder | 4.0 – 50.0 |
| Stop height | Shown in the builder | 4.0 – 45.0 |