Стойка держателей инструмента
Настенная стойка с настраиваемым числом, диаметром и шагом гнёзд, глубиной и креплением.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Прорезь count | Shown in the builder | 2.0 – 16.0 |
| Прорезь style | Shown in the builder | — – — |
| Прорезь diameter | Shown in the builder | 8.0 – 60.0 |
| Прорезь opening | Shown in the builder | 4.0 – 40.0 |
| Прорезь spacing | Shown in the builder | 15.0 – 100.0 |
| Depth | Shown in the builder | 20.0 – 140.0 |
| Thickness | Shown in the builder | 4.0 – 20.0 |
| Задний height | Shown in the builder | 25.0 – 160.0 |
| Передний lip | Shown in the builder | — – — |
| Передний lip height | Shown in the builder | 4.0 – 30.0 |
| Landing hole | Shown in the builder | 2.0 – 12.0 |
| Landing count | Shown in the builder | 2.0 – 4.0 |
| Countersink | Shown in the builder | — – — |
| Head diameter | Shown in the builder | 4.0 – 24.0 |