Настенная полка
Параметрическая полка: ширина, глубина, толщина, задняя стенка, бортики и монтажные отверстия.
Configure the model
Review the parameters, then open the model in the builder. Change dimensions methodically and inspect the result before manufacturing.
Open in builderOutput and formats
The builder displays a 3D preview. Available export formats, design saving and ordering depend on the model and account permissions and are shown in the interface.
Parameters
| Parameter | Units | Range |
|---|---|---|
| Dimension by X - width | Shown in the builder | — – — |
| Dimension by Y - depth | Shown in the builder | — – — |
| Dimension by Z - height | Shown in the builder | — – — |
| Width | Shown in the builder | 60.0 – 600.0 |
| Depth | Shown in the builder | 40.0 – 300.0 |
| Shelf thickness | Shown in the builder | 4.0 – 24.0 |
| Задний height | Shown in the builder | 30.0 – 200.0 |
| Side walls | Shown in the builder | — – — |
| Side height | Shown in the builder | 10.0 – 100.0 |
| Передний lip | Shown in the builder | — – — |
| Передний lip height | Shown in the builder | 5.0 – 60.0 |
| Rib count | Shown in the builder | 0.0 – 6.0 |
| Rib thickness | Shown in the builder | 2.0 – 15.0 |
| Rib height | Shown in the builder | 10.0 – 80.0 |
| Landing hole | Shown in the builder | 2.0 – 12.0 |
| Landing count | Shown in the builder | 2.0 – 4.0 |
| Landing spacing | Shown in the builder | 30.0 – 500.0 |
| Countersink | Shown in the builder | — – — |
| Head diameter | Shown in the builder | 4.0 – 25.0 |